Status Displays - G&D DVICenter DP16 Installationsanleitung

Status displays

LEDs at the front panel
The LEDs on the front panel of the matrix switch show the system's operating status:
Section LED
Ident. Ident.
Power Red.
Main
Status Ready
Switch
Status Meaning
on LED to identify the device in the web application is active.
blinking Port type at Dynamic Ports is shown.
on The power pack is turned on and supplies the required voltage.
off The power pack is turned off or the connection to the mains
could not be established.
on The power pack is turned on and supplies the required voltage.
off The power pack is turned off or the connection to the mains
could not be established.
blinking The network subsystem works properly.
off The network functionality is not supported.
blinking The matrix switch is ready for operation.
Central Module » Status displays
G&D DVICenter DP16 · 26