Expanding The Kvm Matrix System By Cascading; Maximum Number Of Connectable Computers; Connecting A Slave Central Module - G&D DVICenter DP16 Installationsanleitung

Expanding the KVM matrix system by
cascading
Cascading increases the number of connectable target modules to up to 686.
To cascade your devices, connect a slave central module to the Dynamic Ports of a
master central module. The port must be configured for the connection of target
modules.
You can connect target modules or other slave central modules to the slave central
module (up to 2 cascade levels).

Maximum number of connectable computers

The following tables show the maximum number of computers subject to the num-
ber of consoles to be implemented.
In the first cascade level, you can increase the number of computers as follows
Consoles Computers Central modules
1 225
2 98
3 53
4 36
In the second cascade level, you can increase the number of computers as follows
Consoles Computers Central modules
1 –
2 686
3 213
4 108

Connecting a slave central module

How to connect a slave central module to a master device:
1. Configure one Dynamic Port for connecting the user modules of the slave central
modules for each console that is to be accessing the slave central module simulta-
neously.
To configure the ports, proceed as described on page 15.
2. Connect the configured Dynamic Ports for accessing user modules to Dynamic Ports
for accessing the target modules of the master device.
Central Module » Expanding the KVM matrix system by cascading
16
8
5
4
–
57
21
13
Consoles Computers Central modules
5 23
6 14
7 11
8 -
Consoles Computers Central modules
5 47
6 18
7 13
8 -
G&D DVICenter DP16 · 18
:
3
2
2
-
:
7
3
3
-