Status Displays; Technical Data - G&D DVICenter DP16 Installationsanleitung

Trans.: Use a category 5e (or better) twisted pair cable to connect this interface to the
Dynamic Port of the USB/RS232 Main Channel that is assigned to the target computer.
Power In: Insert the connection cable of the power pack to this interface. Now con-
nect the power cable to the power pack and a power outlet.

Status displays

The blinking Transmission LEDs show the following connection statuses:
LED Colour Status
Left Yellow Off
On
Right Green On
Blinking
Flashing

Technical data

Interfaces to
target computer:
Data transmission to
central module
USB 2.0
RS232
Main power supply
Housing
Operational 
environment
Conformity
Meaning
No connection to network.
A user module is accessing the target module.
A user module is accessing the target module.
No communication with central module.
Connection to central module established successfully.
No user module is accessing.
USB 2.0:
RS232:
Interface:
Transmission length:
Transmission type:
Transmission rate:
Transmission type:
Transmission rate:
Signals:
Type:
Connector:
Power consumption:
Material:
Dimensions (W × H × D):
Weight:
Temperature:
Air humidity:
Target modules » U2-R-CPU
1 × USB-B
1 × D-SUB 9 socket
1 × RJ45 socket
Max. 140 metres
Transparent
Max. 480 Mbit/s
Transparent
Max. 115,200 bit/s
RxD, TxD, RTS, CTS, DTR, DSR, DCD
Portable power pack
1 × Mini-DIN 4 socket
12 VDC/1.5 A
Anodised aluminium
105 × 26 × 104 mm
Approx. 240 g
+ 5 to + 40°C
< 80%, non condensing
CE, RoHS
G&D DVICenter DP16 · 40