Status Displays; Front Panel - G&D DVICenter DP16 Installationsanleitung

Status displays

Front panel

The LEDs on the front panel of the user module inform you about the system's
operating status.
Section LED Status Meaning
Power Red. on
off
Main on
off
Status Trans. on
off
System on
blink-
ing
Console Video on
off
K/M on
off
blink-
ing
Power
Red.
Main
The optional power pack is connected and the required voltage
(12 Volt) is available.
The optional power pack is not (properly) connected.
The main power supply provides the required voltage.
The power button is turned off or the connection with the mains
could not be established.
Check the proper connection of the power supply cable.
The communication with the matrix switch could be established.
The communication with the matrix switch could not be estab-
lished.
The device is booting or carries out a firmware update.
The system is ready for operation.
Stable image signal at video input.
The incoming video signal could not be detected or it lacks the
required quality to be processed by the system.
A local keyboard was found.
No power at PS/2 interface or USB bus.
The CPU input (PS/2 or USB) is active and ready.
No local keyboard was found.
User module » DVI-CON
Console
Status
Trans. Video
System K/M
G&D DVICenter DP16 · 44
Service