Procedure For Changing The Touch-Button Indicator Mode - Gaggia VISACREM VETRO Bedienungsanleitung

5.2 Procedure for changing the touch-button indicator mode

1. Turn off the machine with the main switch.
2. Turn on the machine with the main switch and wait until the long coffee button from group 1 (left touch-button) goes out.
3. Simultaneously Hold down the buttons for one short coffee and a continuous coffee from group 1 (left), see figure 1.
4. Wait until the 3 touch-button LEDs from group 1 start to flash (see figure 2), indicating that you are now in touch-button indicator
mode.

Press the "one short coffee" button to select "Mode 1".

Press the "long coffee" button to select "Mode 2".

Press the "two short coffees button to select "Mode 3".

After selecting the preferred mode, wait until the machine consecutively tests all the group heads with the turning on and subsequent
turning off of each of the group heads. At the end of the auto-test, the machine will be ready for use.
Hold down the one short and continuous coffee buttons simultaneously.
Figure 1.
Group 1
Mode 3.
Mode 2.
Mode 1.
29
Figure 2.
Touch-button
indicator mode
EN