Dimensions And Weight - Anest Iwata DDP Serie Bedienungsanleitung

DPS-120 C - DPS-90 G DIAPHRAGM PUMPS
EN
6.1 TECHNICAL SPECIFICATIONS
STAND TYPE DPS 120-1C.TE/CN.TE/C-WB.TE
DDP version mounted on stand, with paint regulator, 2 air regulators (for pump and gun),
paint filter unit, dip tube with filter, fluid recirculation, 1 overpressure valve, ball valve with
exhaust hole.
• PR-5BL paint regulator for DPS 120-1C.TE and DPS 90-1G.TE
• PR-5BLN paint regulator for DPS 120-1CN.TE and DPS 90-1GN.TE
• PR-5BL WB paint regulator for DPS 120-1C-WB.TE and DPS 90-1G-WB.TE
TANK MOUNT TYPE DPS 120-2C.TE/CN.TE/C-WB.TE
DDP version mounted on Tank mount lid (without tank) with paint regulator, 2 air regulators
(for pump and gun), paint filter unit, dip pipe with filter (for 20L tank), fluid recirculation,
overpressure valve, ball valve with exhaust hole.
• PR-5BL paint regulator for DPS 120-2C.TE and DPS 90-2G.TE
• PR-5BLN paint regulator for DPS 120-2CN.TE and DPS 90-2GN.TE
• PR-5BL WB paint regulator for DPS 120-2C-WB.TE and DPS 90-2G-WB.TE
CART TYPE DPS 120-3C.TE/CN.TE/C-WB.TE
DDP version mounted on wheel cart with paint regulator, 2 air regulators (for pump and gun),
paint filter unit, dip tube with filter, fluid recirculation, 1 overpressure valve, ball valve with
exhaust hole.
• PR-5BL paint regulator for DPS 120-3C.TE and DPS 90-3G.TE
• PR-5BLN paint regulator for DPS 120-3CN.TE and DPS 90-3GN.TE
• PR-5BL WB paint regulator for DPS 120-3C-WB.TE and DPS 90-3G-WB.TE
WALL MOUNT TYPE DPS 120-4C.TE/CN.TE/C-WB.TE
DDP version mounted on wall mounting bracket with paint regulator, 2 air regulators (for
pump and gun), paint filter unit, dip tube with filter, fluid recirculation, 1 overpressure valve,
ball valve with exhaust hole.
• PR-5BL paint regulator for DPS 120-4C.TE and DPS 90-4G.TE
• PR-5BLN paint regulator for DPS 120-4CN.TE and DPS 90-4GN.TE
• PR-5BL WB paint regulator for DPS 120-4C-WB.TE and DPS 90-4G-WB.TE
CART TYPE + HOPPER (6 lt.) DPS 120-36C.TE/CN.TE/C-WB.TE DPS 90-36G.TE/GN.TE/G-WB.TE
DDP version mounted on wheel cart with paint regulators, 2 air regulators (for pump and gun),
paint filter unit, plastic hopper (6 lt. with 50 mesh filter), fluid recirculation, 1 overpressure
valve, ball valve with exhaust hole.
• PR-5BL paint regulator for DPS 120-36C.TE and DPS 90-36G.TE
• PR-5BLN paint regulator for DPS 120-36CN.TE and DPS 90-36GN.TE
• PR-5BL WB paint regulator for DPS 120-36C-WB.TE and DPS 90-36G-WB.TE
8
DPS 90-1G.TE/GN.TE/G-WB.TE
DPS 90-2G.TE/GN.TE/G-WB.TE
DPS 90-3G.TE/GN.TE/G-WB.TE
DPS 90-4G.TE/GN.TE/G-WB.TE
DPS-120 C - DPS-90 G

6.2 DIMENSIONS AND WEIGHT

Dimensions
UNIT ASSEMBLY
(mm)
STAND TYPE 409x358x806
TANK MOUNT TYPE 357x312x798
CART TYPE 437x452x868
WALL MOUNT TYPE 363x214x534
CART TYPE w/ HOPPER 6 lt.
526x528x868
6.3 SAFETY SYSTEM
Several safety systems have been conceived during the diaphragm pump design and manufacture to safeguard the operator,
as it prescribed by all applicable safety regulations.
SAFETY VALVE
A 7 bar calibrated safety valve is installed to ensure the pump working pressure does not
exceed the limits inside the feeding circuit.
Release hole
If the calibration pressure is exceeded, the valve opens by releasing the excess of air.
WARNING
DO NOT DISASSEMBLE THE SAFETY VALVE. ANY TAMPERING WITH COULD BE
DANGEROUS FOR THE OPERATOR AND COMPROMISE THE EQUIPMENT GOOD WORKING.
EXHAUST VALVE
In case of anomalies during working, turn 90° the exhaust valve lever. In this way the air supply will be interrupted and the
residual pressure inside the pump will be released.
ON
6.4 SAFETY PICTOGRAMS
Some pictograms can be found on the pump with the safety warnings to follow by anyone who is going to use it.
WARNING
THE MANUFACTURING COMPANY IS NOT TO BE HELD RESPONSIBLE FOR DAMAGE OR ACCIDENTS TO PEOPLE
OR THINGS COMING FROM THE NON-COMPLIANCE WITH THE PRESCRIBED RULES.THE RESPONSIBILITY RESTS
ENTIRELY WITH THE OPERATOR HIM SELF.
DIAPHRAGM PUMPS
Weight Dimensions Weight
(kg) (mm) (kg)
10.5 (C) 9.6 (G)
13.9 (CN) 409x358x764 11.7 (GN)
10.5 (C-WB) 9.6 (G-WB)
9.6 (C) 8.7 (G)
12.1 (CN) 357x312x756 10.8 (GN)
9.6 (C-WB) 8.7 (G-WB)
13.0 (C) 12.1 (G)
15.5 (CN) 437x452x868 14.2 (GN)
13.0 (C-WB) 12.1 (G-WB)
9.5 (C) 8.6 (G)
12.0 (CN) 363x214x492 10.7 (GN)
9.5 (C-WB) 8.6 (G-WB)
13.0 (C) 12.1 (G)
15.5 (CN) 526x528x868 14.2 (GN)
13.0 (C-WB) 12.1 (G-WB)
OFF
EN
9