Disassembly And Replacement - Bosch Rexroth 2GE Serie Montageanleitung

2/3/4/5GE.... | 3 608 870 E96/2016-03
11 Disassembly and
replacement
CAUTION
Incorrect product assembly/disas-
sembly possible!
Risk of injury and damage to the device
in later operation!

Assemble/disassemble the product
according to the following informa-
tion in the correct order.

Only qualified personnel are author-
ized to assemble/disassemble the
product.

Always switch off the power supply
to the relevant system component
before assembling/disassembling
the product.
Bosch Rexroth AG

Disassembly and replacement

CAUTION
Improper handling!
Under unfavorable conditions, handling
or assembling/disassembling specific
parts and components in an unsuitable
manner could cause injuries. Injury due
to crushing, shearing, cutting, impact!

Observe the general construction
and safety regulations for handling
and assembly/disassembly.

Use suitable assembly/disassembly
and transport equipment.

Prevent trapping and crushing inju-
ries by taking suitable precautions.

Only use suitable tools. Use special
tools if stipulated.

Use lifting equipment and tools prop-
erly.

If necessary, use suitable protective
equipment (for example, protective
goggles, safety shoes, protective
gloves).

Do not stand under suspended
loads.

Any fluids that have leaked onto the
floor must be wiped up immediately
to prevent slip hazards.

Lay cables and lines in accordance
with the permissible bending radi-
uses so that they cannot be dam-
aged and no one can trip over them.
63/70