60/70
Bosch Rexroth AG
Maintenance and repair
CAUTION
High torques with hand-held
Rexroth tightening spindles!
If tightenings with higher torques are car-
ried out with a hand-held Rexroth tight-
ening spindle, injuries, particularly at the
joints, may result due to the acting
forces.
Assemble and use a torque support.
If the product is installed in an overall sys-
tem, no further manual operation is re-
quired. The tightening channel, the tighten-
ing programs and applications, etc. are
configured or changed via the operating
program of the tightening system, e.g.
BS300 or BS350.
2/3/4/5GE.... | 3 608 870 E96/2016-03
9
Maintenance and re-
pair
9.1
Cleaning and care
CAUTION
Direct contact with the detergent!
Direct skin or eye contact with the deter-
gent as well as swallowing or inhaling
the detergent may cause injuries.
Avoid direct physical contact with the
detergent.
Observe the instructions for use and
first aid in the "Technical safety
sheet" as well as in the "Safety data
sheet" of the detergent manufacturer.
NOTE
Penetrating dirt or liquids!
Failures may occur. Safe function of the
product is no longer ensured.
Always provide for absolute cleanli-
ness when working at the product.
For cleaning Rexroth tightening spind-
les and their components, use the
LOCTITE® 7063™ detergent, see sub-
sequent manufacturer's information.
Manufacturer:
Henkel AG & Co. KGaA
Henkelstr. 67
40191 Düsseldorf
Germany