Symbols; Designations; Abbreviations - Bosch Rexroth 2GE Serie Montageanleitung

44/70 Bosch Rexroth AG
About this documentation

1.3.2 Symbols

The following symbols mark notes that are
not safety-relevant but increase the under-
standing of the documentation.
Tab.3: Meaning of the symbols
Symbol Meaning
If this information is disregarded,
the product cannot be used and/
or operated to the optimum ex-
tent.

single, independent step
Note This information refers to possible
limitations with regard to the prod-
uct.

1.3.3 Designations

This documentation uses the following des-
ignations:
Tab.4: Designations
Designation Meaning
BS Operating program of the
tightening system (e.g.
BS300/BS350)
2/3/4/5GE.... | 3 608 870 E96/2016-03

1.3.4 Abbreviations

This documentation uses the following ab-
breviations:
Tab.5: Abbreviations
Abbreviation Meaning
DIN Deutsches Institut für
Normung (German Stand-
ards Institution)
EMC Electromagnetic
Compatibility
EN Europäische Norm (Euro-
pean standard)
ISO International Organization
for Standardization
NEC National Electric Code
NEMA National Electrical Manu-
facturers Association
PELV Protective Extra Low Volt-
age