Personnel Qualifications; General Safety Instructions - Bosch Rexroth 2GE Serie Montageanleitung

46/70 Bosch Rexroth AG
Safety Instructions
2.4

Personnel qualifications

Assembly, commissioning, maintenance,
troubleshooting and disassembly of this
Rexroth product and the handling of the
product require basic electrical and me-
chanical knowledge, as well as knowledge
of the appropriate technical terms. Handling
of the product includes e.g. completion of a
Rexroth tightening spindle from the compo-
nents and the installation of a Rexroth tight-
ening spindle into a system.
In order to ensure the safe use, the speci-
fied activities may therefore only be carried
out by qualified technical personnel or an in-
structed person under the direction and su-
pervision of qualified personnel.
In other words, only appropriately trained
and qualified personnel are permitted to
work with or near the product during the as-
sembly, commissioning, maintenance, trou-
bleshooting and disassembly.
Qualified personnel
• are those who can recognize possible
hazards and institute the appropriate
safety measures due to their professional
training, knowledge, and experience as
well as their understanding of the relevant
conditions pertaining to the work to be
done.
• must observe the rules relevant to the
subject area.
• must be trained, instructed, and author-
ized to switch electrical circuits and de-
vices on and off in accordance with the
accepted rules of safety and current tech-
nology, ground them, and mark them ac-
cording to the job requirements.
2/3/4/5GE.... | 3 608 870 E96/2016-03
• must be sufficiently familiar with all warn-
ings and precautions according to this
documentation and the documentation of
the respective component and under-
stand their content.
• must have appropriate safety equipment
and be trained in first aid.
Persons who assemble, operate, disassem-
ble, or maintain products from Bosch
Rexroth AG must not consume any alcohol,
drugs, or pharmaceuticals that may affect
their ability to respond.
2.5 General safety
instructions
• Observe the accident prevention and en-
viromental protection regulations applica-
ble to your country.
• Observe the safety regulations of the
country in which the product is used/op-
erated.
• Use Rexroth products only when they are
in good technical order and condition.
• Observe all notes on the product.
• Persons who assemble, operate, disas-
semble or maintain Rexroth products
must not consume any alcohol, drugs or
pharmaceuticals that may affect their abil-
ity to respond.
• Only use accessories and spare parts
that are approved by the manufacturer.
• Observe the technical data and ambient
conditions specified in the product docu-
mentation.
• Don't work with the product in explosive
atmospheres where there are combus-
tible liquids, gases or dusts.