Commissioning; Operation - Bosch Rexroth 2GE Serie Montageanleitung

2/3/4/5GE.... | 3 608 870 E96/2016-03
7

Commissioning

CAUTION
Use of wrong components!
Damage to persons and property!

Only operate the tightening spindle
in connection with the intended com-
ponents!
The tightening system is commissioned by
the operating system, e.g. BS350.
Notes on the commissioning can be
found in the software of the Rexroth
tightening system, i.e. the operating
system, e.g. BS350.
Bosch Rexroth AG
8

Operation

CAUTION
Hot surfaces possible on motor
housings and gearboxes!
Risk of injury! Risk of burns!

Do not touch device housing sur-
faces at heat sources! Risk of burns!

Do not touch housing surfaces of
motors and gearboxes! Risk of burns!

Depending on the operating condi-
tions, temperatures during or after
operation may exceed 60 °C
(140 °F).

After switching off the motors, allow
them to cool down sufficiently before
accessing them.

Wear protective gloves or do not
work near hot surfaces.

For specific applications, the manu-
facturer must undertake measures on
the end product, the machine, or the
system to prevent burn injuries dur-
ing the end use. These measures
must be in accordance with the
safety regulations. Examples of pos-
sible measures are: safety warnings,
a separating safety device (shielding
or locking), and technical documen-
tation.
59/70
Commissioning