RHOSS H58624/B Gebrauchsanweisung Seite 37

No Item
1 Mode
2 Fast hot water
3 Cool + hot water
4 Heat + hot water
5 Quiet mode
6 Weather depend
7 Weekly timer
8 Holiday release
9 Disinfection
10 Clock timer
11 Temp. timer
12 Emergen. mode
13 Holiday mode
14 Preset mode
15 Error reset
16 WiFi reset
17 Reset
2.2.1 Mode
At the Function setting page with the unit turned off, by touching "Mode", it will go to the desire mode setting page. Then by touching "OK" this
setting will be saved and the control panel will back to the function setting page.
NOTE

Mode setting is allowed only when the unit is turned off, otherwise a dialog box will pop up, saying "Please turn off the system first!"

If the water tank is not activated, only 'Heat" and "Cool" mode are allowed.

If the water tank is activated, "Cool", "Heat", "Hot water", "Cool+Hot water" and "Heat+Hot water" are allowed.

The setting can be memorized and re-proposed upon power failure (see 2.6.1 On/Off memory).

The default value is Heat.
Function Setting
Range Default
Cool
Heat
Hot water
Heat
Cool + Hot water
Heat + Hot water
On/Off Off
Cool/Hot water Cool
Heat/Hot water Heat
On/Off/Timer Off
On/Off Off
On/Off Off
On/Off Off
On/Off Off
On/Off Off
On/Off Off
On/Off Off
On/Off Off
On/Off Off
/ /
/ /
/ /
If the water tank is not enable, then only "Cool" and "Heat"
are available.
If the water tank is not enable, it will be reserved.
If the water tank is enable, it will be defaulted to be "Hot water";
when not enable, it will display NA (not available).
If the water tank is enable, it will be defaulted to be "Hot water";
when not enable it will display NA (not available).
If the water tank is not enable, this function is not active.
The disinfection date ranges from Monday to Sunday.
The disinfection time ranges from 00:00~23:00.
Saturday at 23.00 is the defaulted.
Some error can be cleared only when the cause of fault has been
restored.
It is used for reset the WiFi.
It is used to reset all user parameter setting.
37
ELECTA-ECO
Remarks
/
/
/
/
/
/
/
/