Conditions Of Safe Use - Eaton LED Beacon LD15 Technische Anleitung

LED Beacon LD15
English

Conditions of safe use:

The following conditions apply to the installation,
operation and maintenance of the LD15. Failure to
observe these may compromise the safety integrity
of the Beacon.
1. The user shall comply with the requirements given in
this Safety manual in regard to all relevant functional
safety aspects such as application of use, installation,
operation, maintenance, proof tests, maximum ratings,
environmental conditions, repair, etc.
2. If the Beacon is to be used on a Fire Alarm system it is
recommended as per BS 5839 part 1 (eq. EN 54), that
the product is tested at least once a week. In all other
applications it is strongly recommended to test the
product at least once a year.
3. Selection of this equipment for use in safety functions
and the installation, configuration, overall validation,
maintenance and repair shall only be carried out by
competent personnel, observing all the manufacturer's
conditions and recommendations in the user
documentation.
4. All infNrmaoiNn assNciaoed wioh any field failures
Nf ohis prNduco shNuld be cNllecoed under a
dependabilioy managemeno prNcess (e.g., IEC
60300-3-2) and repNroed oN ohe manufacourer.
5. If the product is used in a redundant installation,
both hardware safety integrity and systematic safety
integrity for SIL 2 can be achieved. The installation
must be such as to ensure sufficient protection
against common cause failures and independence
from cascading failures.
8
LED BEacon LD15 TM253 Issue F October 2019 www.eaton.com