Technical Data; Safety Instructions; Conformity With Standards; Field Of Application - Eaton 400 Betriebsanleitung

1

Technical Data

EC-Type Examination Certificate:
Apparatus marking to 2014/34/EU
EN 60079-0:
IECEx-type-examinationcertificate:
Apparatus marking:
IEC 60079-0
Perm. operating temperature*:
Ambient temperature range
eLL. 92 LED:
eLL. 92 LED HT:
Perm. storage temperature in original packing:
Rated power
LED Module 400:
LED Module 800:
Weight
LED Module 400:
LED Module 800:
*only approved for operation in the following light fittings: eLL. .. ...
1.1 Delivery
LED Module 400 2 x 13 W or LED Module 800 2 x 26 W
EMV-Satz, consisting of
- EMC-light-switch-cover (fig 3.5)
- EMC-contact (fig. 3.6)
2

Safety instructions

Target group:
For skilled electricians and suitable qualified, instructed
personnel in accordance with national legislation, including
the relevant standards and, where applicable, in acc. with
IEC/EN 60079-17 on electrical apparatus for explosive atmospheres.
The letter "U" in the certification number means that this component
certificate may only be used as a basis for the certification of
apparatus or protective systems.
The LED module does not affect the temperature class T4 of light
fitting type eLL. 92.
The LED module shall be used for the intended purpose and shall be
in a perfect and clean state.
Modifications to the LED module or design changes are not permitted.
Prior to being put into operation, the LED module shall be checked in
accordance with the instructions given in section 6.
The national safety rules and regulations for the prevention of
accidents, as well as the safety instructions included in these
operating instructions, that, like this text, are set in italics, shall be
observed.
2.1 Legend
Safety warning
Note
8
LED module 400; LED module 800
BVS 13 ATEX E 018 U
II 2 G Ex eb mb IIC Gb
IECEx BVS 13.0030 U
Ex eb mb IIC Gb
-25 °C to +95 °C
-25 °C to +45 °C
-25 °C to +55 °C
-25 °C to +45 °C
2 x 13 W
2 x 26 W
approx. 1.7 Kg
approx. 3.3 Kg
3
The LED module is conform to the standards specified in the EC-Declara-
tion of conformity, enclosed separately.
References to standards and directives in these operating instructions
always relate to the latest version. Other additions (e.g. details relating to
the year) shall be observed.
4
The LED module is intended for installation in the light fitting type
eLL. 92 18/18 and eLL. 92 36/36 with an EVG 09 built in or after 2011.
The field of application in hazardous areas as stated on the type label of
the light fitting is not restricted by the installation of the LED module.
The enclosure materials used, including any external metal parts, are high
quality materials which ensure a corrosion protection and resistance to
chemical substances corresponding to the requirements in a "normal
industrial atmosphere" .

Conformity with standards

Field of application

GB