Angle Calculation - PeakTech 9021 Bedienungsanleitung

6.6. Angle Calculation

The angle calculation is used for the alignment of satellite systems. Open the angle
calculation and the following screen appears in the main menu:
1) Satellite: Use the ◄Left/Right► keys to select the satellite or press the OK button
and select the satellite from the pop-up list.
2) Sat longtitude: Use this value to manually input the satellite position in degrees
using the numeric keypad.
3) East / West: Change orientation of the satellite with ◄Left/Right► arrow keys.
4) User Latitude: Specify the latitude of the user's position where the satellite system
is placed in this field with the numeric keypad.
5) North/South: Use the ◄Left/Right► arrow keys to enter the orientation of the
latitude for the location (north or south). Europe is in the northern hemisphere, so
here is "North" the right choice.
6) User Longitude: Specify in this field the longitude of the location where the
satellite system and user is placed using the numeric keypad.
7) East/West: Change the longitude of your location with ◄Left/Right► arrow keys.
8) Angle calculation: Press the OK button to start the angle calculation. Please
proceed as described in the following section.
-56-