Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.
TP Scan:
Start searching channels only on the selected transponder with the OK button. With
the ◄Left / Right► button you can select before whether "all" stations incl. Pay-TV
can be searched or "FTA Only", with encrypted programs are not listed. The channels
found are listed in a table:
7.
Sat Scan:
Start searching channels on all transponders of the selected satellite. The channels
found are listed in a table, as shown in the "TP Scan".
8.
Blind Scan: By pressing the blue "Find" button in the satellite search menu you can
also start a blind search, in which all possibilities are driven by the search for an
unknown satellite transponder. The channels found are listed in a table, as shown in
the "TP Scan".
Note:
During the signal search, the bar graph displays the signal level and signal quality.
Simultaneously, the "LOCK" LED lights and the speaker emits an acoustic signal.
In addition DiSEqC indicates which port is connected to the DiSEqC 1.0 switch.
-51-
Werbung
Inhaltsverzeichnis
