Technical Information - IKEA IWM60 Handbuch

ENGLISH
Problem Possible cause
The programme is still running.
The door lock has not been re-
The door will
leased.
not open:
There is water in the drum.
The transit bolts and packing have
not been removed.
The appliance The support feet have not been
produces an adjusted
unusual noise
The drain pump could be blocked.
Too little detergent or unsuitable
detergent has been used.
Stubborn stains have not been
treated prior to washing.
Unsatisfactory
The correct temperature was not
washing results:
selected.
Excessive laundry load.
After the check, switch on the appliance
and press the button 4 to restart the pro-
gramme.
If the malfunction shows again, contact your
After Sales Service.
Model description
(MOD): .....................
Product number (PNC): ...........................
Serial number (S.N.): ...............................

Technical information

Dimensions
The necessary data for the service centre is
on the rating plate. We recommend that
you write the data here:
Width (cm)
Height (cm)
Solution
Wait the end of washing cycle.
Wait a few minutes before open-
ing the door.
Select drain or spin programme to
empty out the water.
Check the correct installation of the
appliance.
Check the correct levelling of the
appliance.
Check the drain pump. (See
"Cleaning the pump" for more de-
tails).
Increase the detergent quantity or
use another one.
Use commercial products to treat
the stubborn stains.
Check if you have selected the cor-
rect temperature.
Reduce the laundry load in ac-
cording to the "Washing Pro-
grammes table".
Made In Italy
© Inter IKEA Systems B.V. 1999
501.514.59
21552
22
59,6
82