IKEA IWM60 Handbuch Seite 11

ENGLISH
Measure out detergent and fabric
softener
1
1
Close the drawer gently
Select the required programme by turning
the programme selector dial (1)
The appliance is now switched on. The indi-
cator light of button 4 starts to blink.
At the end of the programme the selector
dial must be turned to position O, to switch
the appliance off.
For the description of each wash cycle,
the compatibility among the washing
programmes and the options, consult the
chapter «Washing Programmes».
Caution! If you turn the programme
selector dial to another programme
when the appliance is working, the red
indicator light of button 4 will blink 3 times
to indicate a wrong selection. The
Pour the detergent
into the main wash
compartment or
in the appropriate
compartment if the
selected pro-
gramme/option it
requires (see more
details in "Deter-
gent dispenser
drawer").
To pour the right
quantity of the de-
tergent, see more
details in "Degrees
of water hardness".
Pour fabric softener
into the compart-
ment marked
(must not exceed
the «MAX» mark in
the drawer).
appliance will not perform the new selected
programme.
Reduce the spin speed by pressing button
7
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 7 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant indi-
cator light illuminates.
Select the available options by pressing
buttons 7, 6 and 5
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the pro-
gramme.
When these buttons are pressed, the corre-
sponding indicator lights illuminate. When
they are pressed again, the indicator lights
go out. If an incorrect option is selected, the
integrated red indicator light of the button 4
flashes for 3 times.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
Select the Delay Start by pressing button
2
Before you start the programme, if you wish
to delay the start, press the button 2 re-
peatedly, to select the desired delay. The
relevant light illuminates.
You must select this option after you have
set the programme and before you start the
programme.
You can cancel or modify the delay time at
any moment, before you press button 4.
11