Commissioning The Panel; Smart Functions - Swegon CASA W3 Smart Bedienungsanleitung

2.3 Commissioning the panel

When the Smart control panel is put into
service for the first time it starts up in commis-
sioning mode. The first thing that appears on
the screen is the language selection. You can
scroll through the language options using the
up and down buttons. The desired language is
activated by pressing the select button.
Startup settings
Time
Day
Display ID
Accept
Settings" menu appears once you
The "Basic
have selected the language. If the time and
day of the week have already been set in the
system you can accept the settings with the
select button. If the information is missing or
inaccurate, you should set them. If the system
already has a panel whose
you need to give the other panel the value 2.

2.4 Smart functions

The functions displayed under the
tions" menu varies depending on how the ven-
tilation unit is equipped and the choices made
during the commissioning phase. However, all
Smart functions are described here.
You can activate the function from the
functions" menu by pressing the se-
"Smart
lect button when the cursor is on the desired
function. If the select button is pressed and
held, you get access to the function's settings.
Some of the functions are so-called back-
ground functions. For these there is an option
box in the menu that indicates whether the
function is in use or not.
All Smart-boosting can be stopped temporarily by
pressing a selection button. However, the func-
tion remains active and when the conditions are
met the boost function works as normal again.
On models W03VR05SL00A and
W03VL05SL00A of the W3 ventilation unit
Swegon reserves the right to alter specifications.
10:26
Monday
1
ID" is 1,
"Display
"Smart func-
the fireplace function, cooker hood function
and the central vacuum cleaner function are
not available.
BOOST TIME
The function for the Boost operating mode
can be adjusted by selecting the length of
the boost period to 30, 60 or 120 minutes.
Continuous boost can also be selected. If con-
tinuous boost is selected, the ventilation unit
remains in boost mode until the operating
mode is changed from the control panel.
TRAVELLING
You can reduce ventilation unit's power con-
sumption by using the "Travelling" function,
when the home is empty for long periods.
For the "travelling" function you can select
the desired lowering of the fan speeds com-
pared to Away-mode (max. 20 %) and the
desired reduction of the supply air tempera-
ture (max. 2°C).
External cooling is not permitted when the
"Travelling" function is selected.
FIREPLACE FUNCTION
The smart fireplace function facilitates lighting
the fire and ensures clean combustion. Problems
caused by too little draught in an open fireplace
usually occur in the autumn, when the tempera-
ture difference between the indoor and outdoor
air is slight and the chimney is cold. The fireplace
function decreases the extract air fan speed
and increases the supply air fan speed. This
produces temporary excess pressure in the home
while the fire is ignited and in this way creates
an updraught in the chimney. After the first
phase passes the fireplace function switches to
maintenance mode and compensates the need
of combustion air. The function can be cancelled
from the control panel.
Selectable settings for the fireplace function
are the function for the desired operating time
(max. 60 min) and the desired difference in
www.swegonhomesolutions.com
EN
107