Disassembling The Stand Mixer - KitchenAid 5KSM3311 Handbuch

USING THE STAND MIXER
(OPTIONAL) Pour ingredients into the
bowl through the pouring chute.

DISASSEMBLING THE STAND MIXER

Raise the motor head: Check to
be sure that the Stand Mixer is
unplugged, and the speed control is
turned to "0"; then slide the locking
1
lever to the unlock position and lift
the motor head. Once lifted, slide
the locking lever to the lock position
to keep the motor head up.
16 | USING THE STAND MIXER
W10747072E.indb 16
NOTE: The pouring shield* can be
used to avoid ingredients splashing
out of the bowl when mixing as well
as to easily pour ingredients in the
bowl while mixing.
(OPTIONAL) Remove the pouring
shield*: Lift the front of the pouring
shield* clear of the rim of the bowl,
and pull away from the Stand Mixer.
*Accessory sold separately
1/15/2019 5:56:07 PM