STAND MIXER SAFETY
ELECTRICAL REQUIREMENTS
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
10 | STAND MIXER SAFETY
W10747072E.indb 10
Voltage: 220-240 V
Frequency: 50-60 Hz
Wattage: 250 Watts
NOTE: The power rating for your
Stand Mixer is printed on the serial plate.
Do not use an extension cord. If the
power supply cord is too short, have
a qualified electrician or service technician
install an outlet near the appliance.
The maximum rating is based on the
attachment that draws the greatest
load (power). Other recommended
attachments may draw significantly
less power.
1/15/2019 5:56:05 PM