Pkm TI-60 A++IXEZ Bedienungsanleitung Seite 44

4. Lift the extractor hood and hang it on the wall bracket again; s. fig. below.
5. Screw the extractor hood on the wall using the appropriate screws (2x 4*30 mm).
The appliance must be installed in horizontal position. Check proper position
using a spirit level.
6. Install the one-way-valve on the air outlet of the hood; s. fig. below.
A
B
Depending on model.
6
O - -
NE WAY VALVE
A
IR OUTLET
~ ~
44
6