Technical Data - Pkm WPT 8E-A++15 Bedienungsanleitung

1. The appliance is not installed on a
level, dry and solid floor.
2. The (external) water drain hose is not
installed properly.
3. The filters are clogged.
4. The door seal is soiled.
D
RYING LEVEL HAS NOT BEEN REACHED
1. The filters are clogged.
2. The water container is full.
3. Selected programme is unsuitable.
4. Load volume is too big.
T
HE DRYING PERIOD ENDS SHORTLY AFTER THE START OF THE
1. Not enough clothes in the appliance.
Clothes are too dry for the selected
programme.
If the appliance has a malfunction not listed in the table above, or if you have
checked all items in the above table but the problem still exists, please contact the
aftersales service.

8. Technical data

Type
Control system
Max load
Energy efficiency class
Annual energy consumption
Energy consumption
Energy consumption
Noise emission
Power
Rated power input / switched on
Rated power input / switched off
Duration standard drying cycle
W
ATER LEAKAGE
PROGRAMME
T
HE INDICATOR
T
ECHNICAL DATA
1
2
3
4
~
.
1. Align the appliance horizontally.
2. Install the (external) water drain hose
properly.
3. Clean the filters.
4. Clean the door seal.
/
DRYING
1. Clean the filters.
2. Empty the water container.
3. Select a drying programme suitable
for the laundry to be dried.
4. Reduce the load.
.
« E »
ND IS DISPLAYED
1. Select a drying programme suitable
for the laundry to be dried.
*
Heat pump dryer / free-standing
63 dB(A) re 1 pW
~
79
-
TIME IS TOO LONG
Mechanical
8.0 kg
A++
234.00 kWh
1.89 kWh
1.04 kWh
650 W
0.48 W
0.00 W
220 minutes
.