How To Interrupt, Cancel Or Change A Drying Programme - Pkm WPT 8E-A++15 Bedienungsanleitung

If you do not press a button within 10 minutes, the appliance switches to
STANDBY MODE
6. When the drying programme is finished, turn the rotary knob for the programme
selection back to « O
7. Unplug the appliance.

4.6 How to interrupt, cancel or change a drying programme

❖ If you press the button « S
running programme will be interrupted.
❖ The rotary knob and all buttons (except « S
« A
COUSTIC SIGNAL
1. Press the button « S
2. The drying programme is interrupted.
3. Start the interrupted programme again using the button « S
4. Now the programme starts at the point from where it was interrupted before.
H
OW TO CANCEL A DRYING PROGRAMME PREMATURELY
1. To cancel a drying programme prematurely, turn the rotary knob to « O
2. The currently running programme is interrupted and cancelled.
If it is necessary to stop the drying process before the programme has ended, we
recommend you to turn the function-control knob to position « R
wait until the cooling down period has ended before you take your laundry out
of the appliance. This avoids heat accumulation in the dryer. Proceed as follows.
a. Turn the rotary knob to « O
b. Then turn the rotary knob to the programme « R
c. Press the button to start the programme.
d. Wait until the programme is finished.
❖ To change a drying programme, you must cancel the currently running
programme first.
1. Turn the rotary knob to « O
automatically. The display indicates
» to switch off the appliance completely.
FF
H
OW TO INTERRUPT A DRYING PROGRAMME
/ P
TART
» are inactive.
/ P
TART AUSE
».
FF
H
OW TO CHANGE A DRYING PROGRAMME
».
FF
«
» during a drying process, the currently
AUSE
/ P
TART AUSE
» during a drying process.
EFRESH
~ ~
69
».
», « A -
NTI CREASE
/ P
TART AUSE
FF
». Then
EFRESH
».
» and
».
»
.