End Of A Drying Programme - Pkm WPT 8E-A++15 Bedienungsanleitung

❖ Each press of the button « D
1. Set a drying programme suitable for the laundry to be dried and set the desired
additional function(s).
2. Press the button « D
indicated on the display.
You can choose a delay period from 1 hour (min.) to 24 hours (max.).
3. Press the button « S
4. The countdown of the delay period starts and the operational status indicator of
the function « D
5. As soon as the countdown time has elapsed, the set drying programme starts.
6. If you wish to cancel the delayed programme start after pressing the button
« S / P
TART AUSE
switch off the appliance using rotary knob (
During the countdown: press the button « D
duration of the previously set drying programme on the display.
The function « D
(depending on model).

4.5 End of a drying programme

1. All drying programmes end with a 10-minute cooling down period.
2. After the 10 minutes have elapsed, you can open the door and take your laundry
out of the appliance.
3. If you do not take your laundry out of the appliance after the drying programme
has ended, the appliance starts the factory-set anti-crease period (max. 30
minutes). If you activate the extended anti-crease function, this period lasts 120
minutes.
4. When the 30 or 120 minutes have elapsed, the dryer stops automatically.
5. The display indicates « E
chapter 4.8 H
OW TO SWITCH ON
Depending on model.
12
Depending on model.
13
ELAY START
T
HE SEQUENCE OF THE DELAY PERIOD IS
ELAY START
/ P
TART AUSE
» goes on / flashes
ELAY START
» (but before the drying programme has started), you have to
» may not be available for all programmes
ELAY START
» and the acoustic signal sounds for 15 seconds; see
ND
/
» increases the delay period by one hour.
» repeatedly until the desired delay period is
» when having set the delay period.
12
). 13
OFF
ELAY START
OFF THE ACOUSTIC SIGNAL
~ ~
68
:
.
» once to indicate the
.