How To Switch On / Off The Acoustic Signal; Humidity Sensor; Refresh " Und " Warma - Pkm WPT 8E-A++15 Bedienungsanleitung

4.8 How to switch on / off the acoustic signal

❖ The appliance is equipped with an acoustic signal which sounds when a drying
programme is finished.
❖ The acoustic signal can be switched on or off.
❖ The dryer must be switched on. The adjustments of the acoustic signal can be
made while the dryer is set or during operation.
1. Press and hold the buttons « A
simultaneously for 3 seconds.
2. The operational status indicator of the acoustic signal «
3. The acoustic signal is switched on.
1. Press and hold the buttons « A
simultaneously for 3 seconds.
2. The operational status indicator of the acoustic signal «
3. The acoustic signal is switched off.

4.9 Humidity sensor

❖ The sensor detects the moisture of the textiles automatically and adjusts the
drying period needed relevant to the amount of load.
This function is activated automatically for all programmes except « T
« R » und « W
EFRESH
regardless of the current humidity of the laundry.
H
OW TO SWITCH ON THE ACOUSTIC SIGNAL
H
OW TO SWITCH OFF THE ACOUSTIC SIGNAL
A ». These programmes dry after a preset time,
ARM IR
- » und « D
NTI CREASE
- » und « D
NTI CREASE
~ ~
71
ELAY START
» goes on.
ELAY START
» goes off.
IME
»
»
» /