System Parameter Query - poolstar Poolex Platinium Mini Serie Installations- Und Gebrauchsanleitung

4.12

System parameter query

WARNING : This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING : Any change to the reserved settings will automatically void the warranty.
The system's settings can be checked and adjusted via the remote control by following these steps
M
Step 1 : Keep pressing 3s on
M M
Step 2 : Press and
M
Step 3 : Press to select the setting to be modified, the value is blinking.
M M
Step 4 : Press and
M
Step 5 : Press to set the new value.
M
Step 6 : Press to return to the main screen.
If not opération for 10s, it will be exited automatically.
4. Use
until you enter the settings verification mode.
for see the configured parameters.
to adjust the setting value.
27