poolstar Poolex Platinium Mini Serie Installations- Und Gebrauchsanleitung Seite 59

Step 4 : Now add a device to your «Pool»
Click «Add» or «+» and then «Large appliances...» followed by «Water heater.»
At this point, leave your smartphone on the «Add» screen and go to the pairing step for your control box.
Step 5 :
Activate the pairing mode on your heat pump according to the following:
M M
Hold and for 3 seconds to activate WiFi, the symbol
Step 6 :
Now activate the pairing.
Choose the WiFi network to use, enter its password and click «Confirm.»
ATTENTION The «Smart Life» application only supports 2.4GHz WiFi networks.
If your WiFi network uses the 5GHz frequency, go to the interface of your home WiFi network to create a second 2.4GHz WiFi
network (available for most Internet Boxes, routers and WiFi access point).
4. Use
Note: The blinking will stop when the box is connected to WiFi
flashes.
23