Troubleshooting - Silvercrest SDM 1500 B2 Bedienungsanleitung

Troubleshooting

Programme
The appliance is
not working.
The appliance
produces no steam.
The pump makes
unusually loud
A whitish edge
forms on the floor
when the appliance
stops briefly during
SDM 1500 B2
Downloaded from www.Manualslib.com
Possible causes
The plug is not connected.
The "Steam" button
not been pressed.
There is no water in the
The filter
No steam setting has
There is no water in the
noises.
Lime has collected.
operation.
manuals search engine
has
water tank .
is blocked.
been selected.
water tank .
Possible solutions
Connect the appliance to a
mains power socket.
Press the "Steam" button
Fill the water tank with
tap water.
Change the filter
Use the MODE button
select the desired level of steam.
Fill the water tank with
tap water.
Wipe the limescale away with a
damp cloth. If necessary, add a
little descaler onto the cloth.
GB │ IE │ CY │
.
.
to
13 ■