Extension nozzle
♦
Slide the extension nozzle
marking line on the extension nozzle
appliance must be aligned with each other (see fig . A on the fold-out page) .
♦
Turn anticlockwise until both marking lines on the extension nozzle
aligned with both marking lines on the appliance . The extension nozzle
remains locked in this position (see fold-out page Figure B) .
NOTE
►
The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position . This is, however, not possible with the
extension nozzle
■
The extension nozzle
Assembling the squeegee
♦
Remove the upholstery nozzle
brackets onto the squeegee attachment
♦
Then press the upholstery nozzle
attachment
Upholstery nozzle
♦
Slide the upholstery nozzle
The marking line on the upholstery nozzle
appliance must be aligned with each other (see fold-out page Fig . A) .
♦
Turn anticlockwise until both marking lines on the upholstery nozzle
aligned with both marking lines on the appliance . The upholstery nozzle
remains locked in this position (see fold-out page Figure B) .
■
A fabric cover
be used for the cleaning of sensitive surfaces, such as sofas and armchairs .
NOTE
►
The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position . This is, however, not possible with the
upholstery nozzle
■
The upholstery nozzle
SDR 1100 B2
onto the steam nozzle
10
.
10
is removed in the reverse order .
10
14
14
(see fold-out page) .
13
onto the steam nozzle
14
is supplied for use with the upholstery nozzle
15
.
14
is removed in the reverse order .
14
6
and the two marking lines on the
10
and place this together with the two
.
13
under the mount of the squeegee
up to the stop .
6
and the marking lines on the
14
up to the stop . The
10
are
10
are
14
14
. This can
14
GB │ IE
│
31
■