Safety Guidelines; Risk Of Electric Shock - Silvercrest SDR 1100 B2 Bedienungsanleitung

Safety guidelines

RISK OF ELECTRIC SHOCK

Connect the appliance only to mains power sockets supply-
►
ing a mains power voltage of 220–240 V ~ / 50 Hz .
In the event of operating malfunctions, and before cleaning the
►
appliance, disconnect the plug from the mains power socket .
To disconnect the power cable, always pull the plug from
►
the socket, do not pull the power cable itself .
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over .
To avoid risks, arrange for defective plugs and/or power
►
cables to be replaced at once by qualified technicians or
our Customer Service Department .
Ensure that the power cable does not become wet or moist
►
during use . Route the cable in such a way that it cannot be
crushed or damaged .
Should the appliance, the power cable or the plug become
►
damaged, arrange for them to be repaired by Customer
Services to avoid hazardous situations .
Disconnect the appliance from the mains power socket be-
►
fore filling it with water, changing accessories or cleaning it .
Use the appliance only in dry indoor areas, not outdoors .
►
Never submerse the appliance in water or other liquids!
►
Never aim the steam jet directly at electrical appliances or
►
equipment which contains electrical components, such as
the interior of ovens .
Never leave a heat-generating device unattended! After
►
use or during work pauses, always remove the plug from the
mains power socket . The appliance heats up and generates
steam pressure continuously when the plug is connected to a
mains power socket!
■ 22 │ GB │ IE SDR 1100 B2