Areas Of Application; Fitting/Removing Attachments; Extension Hose - Silvercrest SDR 1100 B2 Bedienungsanleitung

Areas of application

You can clean either by using steam directly from the steam nozzle
can fit an accessory .
NOTE
► The closer you hold the steam nozzle
better the effect . The steam pressure and temperature are at their highest
directly after leaving to the steam nozzle
► Stubborn stains and dirt must be soaked with water beforehand .
■ Use the squeegee attachment
■ Use the upholstery nozzle
armchairs .
■ Use the angle nozzle
■ Use the round brush

Fitting/removing attachments

WARNING! RISK OF INJURY!
► Always remove the plug from the mains power socket before you fit/remove
an attachment .
► Wait until the appliance has cooled down before you fit/remove an
attachment .
► Wait until all of the steam has dissipated before you fit/remove an
attachment .

Extension hose

♦ Push the extension hose
marking line on the extension hose
ance must be aligned with each other (see fig . A on the fold-out page) .
♦ Turn anticlockwise until both marking lines on the extension hose
aligned with both marking lines on the appliance . The extension hose
remains locked in this position (see fold-out page Figure B) .
NOTE
► The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position . This is, however, not possible with the
extension hose
■ The extension hose
■ 30 │ GB │ IE
to steam clean glass surfaces .
13
with the fabric cover for cleaning sofas and
14
for tight corners or joints, or hard-to-reach places .
12
for stubborn soiling, for example, on wheel rims .
11
onto the steam nozzle
9
9
.
9
is removed in the reverse order .
9
to the surface to be cleaned, the
6
.
6
up to the stop . The
6
and the marking lines on the appli-
SDR 1100 B2
or you
6
are
9
9