Operating The Appliance - Silvercrest SDR 1100 B2 Bedienungsanleitung

Operating the appliance

1) Insert the plug into a mains power socket .
The red control lamp
the mains electricity .
2) As soon as the appliance is ready to use, the green control lamp
up . The red control lamp
NOTE
► While heating up, steam may occasionally escape from the steam nozzle
3) Press the steam lever
If the steam pressure drops, the green control lamp
Release the steam lever
NOTE
► If water drips out of the steam nozzle
pressure falls, release the steam lever
again . Wait until the green control lamp
► The steam cleaner has a thermal cut-out . It switches itself off automatically
in case of overheating (e .g . due to an empty water tank) . If this happens,
pull out the mains plug and refill the water tank
WARNING! RISK OF INJURY!
► If you stop working for an extended period of time and leave the appliance
switched on, steam may occasionally escape even though the steam lever
is not pressed .
SDR 1100 B2
lights up to indicate that there is a connection to
4
stays lit .
4
downwards . Steam comes out of the steam nozzle
until the green control lamp
during operation or the steam
6
. The appliance needs to heat up
5
5
will go out .
5
comes back on .
5
lights up again .
.
3
GB │ IE │
lights
.
6
.
6
29 ■