Checking The Front Fork; Checking The Steering - Benelli BN125 Bedienungsanleitung

Checking the front fork

The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic mainte-
nance and lubrication chart.
To check the condition
Check the inner tubes for scratches, da-
mage and excessive oil leakage.
To check the operation
1. Place the vehicle on a lat surface and
keep it upright.
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it fal-
ling over.
2. While applying the front brake, push
down hard on the handlebars several ti-
mes to check if the front fork compresses
and rebounds
smoothly.
NOTICE
If any damage is found or the front fork
does not operate smoothly, have a Be-
nelli dealer check or repair it.
6 - 25
Periodic maintenance and adjustment

Checking the steering

Worn or loose steering bearings may cau-
se danger. Therefore, the operation of the
steering must be checked as follows at the
intervals specified in the periodic mainte-
nance and lubrication chart.
1. Place the vehicle on a lat surface and
keep it upright.
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it fal-
ling over.
EN
6