Dishwasher Operation; Before Getting Started; Preparation; Protecting The Environment - hanseatic HGVI4582C10J7714DS Gebrauchsanleitung

Page EN-22

Dishwasher operation

Dishwasher operation
(1) (2)

Before getting started

• Read the 'Safety' chapter from page EN-4,
in particular the safety notices.
• Set up and connect the appliance as
described in the "Set-up, connection and
initial start-up" chapter from page EN-28.
• Refill dishwasher detergents, rinse aids
and dishwasher salts or multi-tabs.

Preparation

1. Open the tap completely.
2. Leave the dishwasher door open.
3. Press the button (1) to switch on the
dishwasher.
You will hear a signal tone and the display
and all indicators will illuminate briefly.
(3) (4) (5) (6) - (13)

Protecting the environment

– The ECO programme is the most efficient
programme for cleaning normally soiled
dishes in terms of combined energy and
water consumption.
– If you keep to the maximum specified ca-
pacity when loading your appliance and
you arrange the dishes correctly, energy
and water can be saved (see "Loading the
dishwasher" on page EN-17).
– Manual pre-rinsing of the dishes leads to
higher water and energy consumption and
is not recommended.
– Cleaning dishes in your appliance gen-
erally uses less energy and water than
washing by hand, provided you follow the
instructions in the user manual.
(14) (15)