PAP
(
PAP ON-OFF
PAP Picture
PAP Source
PAP SWAP
PAP ON-OFF
You can activate or deactivate PAP mode by
pressing
PAP Picture
Press
button to enter PAP Picture submenu.
Adjustments of Contrast, Brightness,
Sharpness, Colour, Reset and Store items in
this part are identical with Picture menu in
the Menu System. Refer to Picture menu
explanations in the previous parts.
PAP Source
Select PAP Source item by using
button. Use
Note: When main picture source is TV, EXT-1, EXT-2,
BAV or S-VIDEO, PIP window can only be set
to HDMI-1, HDMI-2, YPbPr, PC source or vice
versa.
PAP SWAP
Select PAP SWAP item by using
button. Use
to swap between the main and the PAP picture.
Note: See Appendix C for all PIP/PAT modes.
Sleep Timer
Press
or
Use
/
button to set the Sleep Timer.
The timer can be programmed between Off
and 120 minutes in steps of 10 minutes.
Downloaded from
www.Manualslib.com
Off
/
button.
/
button to set PAP source.
/
button. This function enables
button to select Sleep Timer.
manuals search engine
If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.
Child Lock
Press
or
Use
/
button to set the Child Lock On or
Off. When On is selected, the TV can only be
controlled by the remote control handset. In
this case the control panel buttons (except for
the STANDBY button) will not work.
Hence, if one of those buttons is pressed,
"Child Lock On" will be displayed on the
screen when the menu screen is not visible.
Language
Press
or
/
button to select the Language.
EXT-2 Out
Use this setting to define Ext-2 signal output.
Press
or
/
button to set Ext-2 Out to TV, EXT1, BAV, V,
YPbPr Audio or PC Audio.
/
Note:
• For copying from a DVD or VCR device, you
should set desired option for EXT-2 output. If
you plug your device to EXT-1, you will copy
the picture that comes from the tuner.
PC Audio In
/
Select PC Audio In by pressing
Using
/
Audio In to TV, EXT-1, EXT-2, BAV, YPbPr Audio
or PC Audio.
Default Zoom
While zoom mode is set as AUTO, the TV will
set the zoom mode in accordance with the
signal of the broadcast. If there is no WSS or
aspect ratio information, the TV will then use
this setting to adopt.
English - 63 -
button to select Child Lock.
button to select Language. Use
button to select Ext-2 Out. Use
/
button, you can change the PC
button.