Rittal Blue e+ Montageanleitung Seite 25

Rittal air duct Blue e+
Fig. 18: Gasket on contact surface between the vertical and horizontal parts

Glue the gasket (W10 x H10 mm) onto the contact surface between the vertical
air duct part and the rear door (fig. 19).
Fig. 19: Gasket on contact surface between the vertical part and the rear door

Attach the sealing strip (W10 x H10 x L372 mm) onto the centre of the rear tray
of the horizontal air duct part (fig. 20).
The top edge of the seal is flush with the top edge of the air duct end piece.
Fig. 20: Attach the sealing strip to the rear air duct tray
5 Installing the air duct
EN
25