Notes On Documentation; General; Target Group; Legal Information Concerning The Operating Instructions - Rittal Blue e+ Montageanleitung

1 Notes on documentation

EN
16
1 Notes on documentation
1.1

General

This document is subject to change without prior notification. No guarantees are
given for the accuracy of the information contained herein. The information is in
particular not to be understood to imply warranted qualities in any product.
1.2

Target group

This document is aimed at persons entrusted with the installation of IT racks and
rack products. Installation work must only be performed by trained persons.
Rittal assumes that you possess the necessary qualifications to perform installa-
tion work and that you are aware of the hazards which may arise when working
with racks and rack products.
1.3

Legal information concerning the operating instructions

Assembly and operating instructions exist as paper documents for the air duct
described here and are enclosed with the equipment.
Rittal GmbH & Co. KG is not responsible for any damage which may result from
failure to comply with these assembly and operating instructions. The same ap-
plies to failure to comply with the valid documentation for accessories used.
1.4

RoHS compliance

The air duct fulfils the requirements of EU Directive 2011/65/EC on the Restric-
tion of Use of Certain Hazardous Substances in Electrical and Electronic Equip-
ment (RoHS 2) of 1 July 2011.
Note:
Corresponding information about the RoHS Directive may be found
on our website at www.rittal.com/RoHS.
1.5

Retention of documents

These instructions and all other applicable documents are inherent parts of the
product. They must be handed over to the plant operator. The operator is then
responsible for storage such that the documents are readily available when re-
quired.
1.6

Copyright

The distribution and duplication of this document and the disclosure and use of
its contents are prohibited unless expressly authorised.
Offenders will be liable for damages. All rights created by a patent grant or reg-
istration of a utility model or design
are reserved.
2

Safety notes

Operating environment
– Attention: The air duct is designed exclusively for use as intended in indoor en-
vironments.
– Also observe the information provided by the manufacturer(s) of the compo-
nents to be installed. Particular attention must be paid to the permissible envi-
ronmental parameters, such as temperature and humidity, and to the de-
mands placed on the ambient air.
Rittal air duct Blue e+