Receiving Unit - Autec C26 PRO Serie Handbuch

Automatic
power off The transmitting unit can switch off automatically when:
- the battery is not charged enough and/or
- the radio remote control has not been used for 3 and a half minutes (to deactivate
automatic switching off, please contact Autec authorised personnel).
Recharging
the battery Remove the battery from the transmitting unit and insert in the battery charger.
The "ON CHARGING" light will illuminate to indicate that the battery is being charged.
Once the battery is fully charged, the "END OF CHARGE" light will illuminate. Battery
charging should be performed at an ambient temperature within the range +5°C to
+45°C.
10

RECEIVING UNIT

G
G
A
B
C
D
E
F
G
External
signalling The POWER light indicates the presence (on) or not (off) of the power supply in the
receiving unit
The ENABLE light indicates that the connection between the transmitting unit and the
receiving unit is enabled (on) or disabled (off).
When the receiving unit is powered, proper operation is indicated when :
- POWER and ENABLE lights on, with transmitting unit on;
- POWER light on and ENABLE off, with transmitting unit off.
LIPROMU2
See the supplied booklet for all instructions, warnings and technical
data regarding the batteries and the battery changer.
A
D
antenna
POWER light
ENABLE light
connection plug
identification plate
technical data plate
closing screws
- 25 -
P
G
B
C
E
L
F
M
N
G
B
POWER light
C
ENABLE light
H
RI97-08 module
L
fuse F1
M
fuse F2
N
fuse F3
P
internal led
B
C
H
English