Warnings Regarding Special Maintenance; Documentation - Autec C26 PRO Serie Handbuch

3. verify and if necessary replace the strips or other fixing systems
4. make sure that the connecting cable has not deteriorated, above all near the cable
entry
5. verify the integrity of the plugs and the connection sockets
7

WARNINGS REGARDING SPECIAL MAINTENANCE

.
The following radio remote control data must be communicated in order to make in-
terventions faster and more reliable:
- serial number
- purchase date (given on the guarantee certificate)
- problem found
- address and telephone number of the place where the device is being used (with the
name of the person to contact)
- supplier.
It is better to have read and understood all parts of this manual, and made
sure that all the instructions it contains have been followed correctly before
contacting the Service technicians.
8

DOCUMENTATION

Instruction
and warnings This manual is an integral part of the radio remote control and its safety functions and
manual gives the main information necessary for installing, using and carrying out mainte-
nance on the radio remote control.
All installation, usage and maintenance operations must be carried out
exclusively by qualified technicians who are suitably trained in relevant nor-
ms and laws.
At least the radio remote control owner, installer, user and the person in charge of its
maintenance must therefore read and understand each part of this manual.
Follow the instructions and warnings given by the machine producer regar-
ding the machine controlled by the radio remote control.
If this manual is lost or damaged, ask for a copy from Autec. Please specify the serial
number of the relative radio remote control.
The information contained in this manual is subject to modification without notice and
is not binding.
No parts of this manual may be reproduced by any means without the written per-
mission of Autec (including recording and photocopying).
While carrying out special maintenance on the radio remote control
and the machine, remove the battery from the transmitting unit and
disconnect the connecting plug from the receiving unit.
Any fault should be repaired by authorised Autec personnel (contact
Service), using original Autec spare parts only.
The minimum documentation indicated below is always supplied
with the industrial radio remote control:
- instruction and warnings manual
- battery charger manual
- a CE conformity declaration
- a guarantee certificate
- the radio remote control technical data sheet
- the enclosed "Limitations & Authorisations".
Make sure that these documents are present. If they are not, please
please ask them to Autec, specifying the radio remote control serial
number.
- 22 -
LIPROMU2