Inhaltsverzeichnis
Werbung
Note: When carrying the appliance from one room to another unplug the power cord and carry it by the
handle. Never move the vacuum cleaner by pulling the power cord.
After use
Switch off the vacuum cleaner and unplug it from the electrical outlet. Press the retractor button, the power
cord rewinds back in the vacuum cleaner. Before attaching any accessories or before cleaning the appliance,
always switch off the vacuum cleaner and unplug the power cord from the outlet. To disconnect the vacuum
cleaner hose, press the hose attachment at the marked points and pull out the hose.
Issues
Do not use an appliance showing any signs of damage. A damaged power cord has to be replaced in an
authorized service centre. Only this way can you prevent safety risks.
See the troubleshooting guide if your vacuum cleaner does not operate correctly. Refer to an authorized
service centre if you are not able to resolve an issue yourself.
Full dust bag indicator
The vacuum cleaner is equipped with an indicator, which changes colour to red if the dust bag is full or if
the suction paths are otherwise blocked. If the full dust bag indicator remains red even after inserting a new
bag, switch off the vacuum cleaner, unplug it from the outlet and check if the hose or the tube of the vacuum
cleaner are not clogged. If the indicator still remains red, contact an authorized service centre or your vendor.
To prevent overheating of the vacuum cleaner and subsequent damage, check the following parts of the
vacuum cleaner:
•
All connections between the hose, telescopic tube and floor brush
•
Opening for connecting the hose
•
Brush throughput
•
Exhaust filter
•
Motor filter
•
Dust bag
CLEANING AND MAINTENANCE
Warning:
Always unplug the power cord from the outlet before any maintenance and cleaning.
1.
Changing the dust bag: When the colour of the dust bag indicator changes to red, it is time to change or
empty the dust bag.
•
Press the lock in front to open the front cover (fig. A).
•
Remove the holder with the full dust bag.
•
Fit the new bag into the holder and return the holder (fig. B).
A
2.
Clean the motor filter twice a year: Open the front cover, take out the dust bag, remove the filter, wash it
in warm water and dry it thoroughly prior to next use. If the filter is damaged replace it with a new one.
3.
Clean the output filter regularly: Open and remove the cover grill of the output filter. Shake to remove the
accumulated dust. If the filter is damaged replace it with a new one.
B
5
Werbung
Inhaltsverzeichnis
Fehlerbehebung
