After Use; Maintenance And Cleaning - ECG VP 2080 S Bedienungsanleitung

After use

Turn off the vacuum cleaner and unplug the power cord from the outlet. Press the retractor button, the power
cord rewinds back in the vacuum cleaner. Before you add any accessories or before cleaning the appliance,
always turn the vacuum cleaner off and unplug it from the outlet.
Issues
Do not use an appliance showing any signs of damage. Damaged power cords must be replaced by a qualified
authorized service centre. Only this way can you prevent safety risks.
See the troubleshooting guide if your vacuum cleaner does not operate correctly. Refer to an authorized
service centre if you are not able to resolve an issue yourself.
Full dust bag indicator
The vacuum cleaner is equipped with an indicator, which changes colour to red if the dust bag is full or if the
suction paths are otherwise blocked. If the full dust bag indicator is red even after inserting a new bag, switch
off the vacuum cleaner, unplug the power cord and check the hose or tube for jammed objects. If the indicator
remains red, refer to an authorized service centre or your dealer. To prevent overheating and possible damage
GB
to the vacuum cleaner, check the following:
• All the connections between hose, telescopic tube and the floor brush
• Opening for connecting the hose
• Brush throughput
• Exhaust filter
• Motor filter
• Dust bag

MAINTENANCE AND CLEANING

Attention:
Always unplug the power cord from the outlet before any maintenance and cleaning.
1. Changing the dust bag: When the colour of the dust bag indicator changes to red, it is time to change or
empty the dust bag.
• Press the lock in front to open the front cover.
• Remove the full dust bag from the holder.
• Insert new dust bag in the holder under the front cover.
2. Clean the motor filter twice a year: Open the front cover, remove the filter, wash it with warm water and dry
thoroughly before using it again. If the filter is damaged replace it with a new one.
3. Clean the output filter regularly: Open and remove the cover grill of the output filter. Shake to remove the
accumulated dust. If the filter is damaged replace it with a new one.
4. Cleaning of the appliance surface: To clean use a soft cloth slightly moistened with a few drops of mild
detergent. Never use a solvent or any abrasive scouring cleaners. Never immerse vacuum cleaner in water
or any other liquid and do not clean it under running water.
28