After Use; Cleaning And Maintenance - ECG VP S 3010 Bedienungsanleitung

3. Attach to the tube accessories suitable for the flooring type. Switch the floor nozzle for carpets or for
hard floors according to the type of floor. The combined nozzle is designed for cleaning narrow spaces
and difficult to reach areas in the corners or between the furniture. Mini PET turbo brush is suitable for
vacuuming animal hair.
4. Starting the vacuum cleaner: plug the power cable in the electrical outlet whose parameters correspond
to the data in the type tag of the vacuum cleaner and press the power button to start the vacuum cleaner.
5. Pulling and rewinding the cord: Grasp the plug and pull out the power cord. Press the retractor button, the
power cord rewinds back in the vacuum cleaner.
Note: Never pull out the power cord beyond the red mark located on the cord. The yellow mark shows the
optimum length of the power cord.
Note: When carrying the appliance from one room to another unplug the power cord and carry it by the
handle. Never move the vacuum cleaner by pulling the power cord.

After use

Switch off the vacuum cleaner and unplug it from the electrical outlet. Press the retractor button, the power
cord rewinds back in the vacuum cleaner. Before attaching any accessories or before cleaning the appliance,
always switch off the vacuum cleaner and unplug the power cord from the outlet. To disconnect the vacuum
cleaner hose, press the hose attachment at the marked points and pull out the hose.
Issues
Do not use an appliance showing any signs of damage. A damaged power cord has to be replaced in an
authorized service centre. Only this way can you prevent safety risks.
See the troubleshooting guide if your vacuum cleaner does not operate correctly. Refer to an authorized
service centre if you are not able to resolve an issue yourself.
Full dust bag indicator
The vacuum cleaner is equipped with an indicator, which changes colour to red if the dust bag is full or if
the suction paths are otherwise blocked. If the full dust bag indicator remains red even after inserting a new
bag, switch off the vacuum cleaner, unplug it from the outlet and check if the hose or the tube of the vacuum
cleaner are not clogged. If the indicator still remains red, contact an authorized service centre or your vendor.
To prevent overheating of the vacuum cleaner and subsequent damage, check the following parts of the
vacuum cleaner:
• All connections between the hose, telescopic tube and floor brush
• Opening for connecting the hose
• Brush throughput
• Exhaust filter
• Motor filter
• Dust bag

CLEANING AND MAINTENANCE

Warning:
Always unplug the power cord from the outlet before any
maintenance and cleaning.
1. Changing the dust bag: When the colour of the dust
bag indicator changes to red, it is time to change or
empty the dust bag.
• Press the lock in front to open the front cover.
• Remove the holder with the full dust bag.
• Fit the new bag into the holder and return the
holder.
Front cover lock
5