Attaching VESA 200 x 100 mm Plate to Hook Plate
Attach adapter plates (J) to hook plate (B) using four
4
M5 x 6 mm screws (K) and four #10 flat washers (L).
Attaching Adapter Plate to Flat Panel Screen
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
®
FOR VESA
75 MOUNTING PATTERN:
5
Choose hole pattern as shown below. Attach hook
plate (A) to back of screen using four M4 x 10 mm
screws (D) as shown below.
*Note: If hole pattern is in a pocket, attach hook
plate (A) to back of screen using four M4 x 20
mm screws (E) and four retaining spacers (F) as
indicated below.
A
D
*For screens with a
hole pattern in a pocket,
spacers (F) go between
adapter plate (A) and
screen.
L
K
WARNING
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
plate (A) to back of screen using four M4 x 10 mm
screws (D) as shown below.
D
F
6 of 16
J
B
A
ISSUED: 02-05-09 SHEET #: 202-9336-1