Mounting And Removing Flat Panel Screen; Installing Flat Panel Screen To Wall Plate - PEERLESS Mounts SmartMount SF670 Anbringung Und Zusammenbau

Mounting and Removing Flat Panel Screen

WARNING
• Always use an assistant or mechanical lifting
equipment to safely lift and position the fl at panel
screen.
Hook adapter brackets (BB) onto wall plate (AA).
3
Then slowly swing screen in as shown. Turn safety/
security screws, using security allen wrench (EE),
clockwise at least six times to prevent screen from
being removed as shown in detail 1 of fi gure 3.1.
Screen can be adjusted horizontally if desired as
shown in fi gure 3.2.
NOTE: To lock the screen down, tighten safety/
security screws to wall plate as shown in detail 1.
To remove screen from mount, loosen safety/
security screws, swing screen away from mount,
and lift screen off of mount.
CAUTION
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
AA
SAFETY/
SECURITY
SCREWS
BB
DETAIL 1
8 of 34
ISSUED: 11-09-07 SHEET #: 202-9253-3 04-13-10
All other brand and product names are trademarks or registered trademarks of their respective owners.
BB
AA
fi g. 3.1
fi g. 3.2
© 2009, Peerless Industries, Inc. All rights reserved.
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com