Warranty Conditions - Cleanmaxx XL-306E-220 Gebrauchsanleitung

❐ Turn the device off and remove the mains plug from the socket,
– if you stop working with the device,
– if you are no longer using the device,
– before you change the attachments,
– if a fault or error occurs while the device is in operation,
– if liquids or foreign bodies have found their way into the device,
– before a thunderstorm,
– before you clean parts of the device and accessories.
❐ The device must be switched off when inserting or removing the mains plug.
❐ Always pull the plug and never the cable!
❐ Never pull the device by the cable to move it. Use the carrying handle.
❐ Do not roll the vacuum cleaner over the cable.
❐ If you detect during vacuum cleaning an unpleasant smell although the device had already
been used frequently, the device might be defective. Switch off the device, unplug from the
mains and immediately contact the customer service department.
❐ Do not try to lubricate the rollers with lubricant or oil. This would cause dust and dirt to
increasingly adhere to the rollers.
❐ Empty the dust container at the latest when it is filled to the MAX mark. The filters must
also be cleaned at regular intervals. Otherwise the motor may be overloaded.
❐ The filters must be completely dry again after washing before they are installed in the device
again.
❐ Use only original manufacturer's accessories.
❐ Store the device in a cool, dry place that is not accessible to children and animals when it is
not being used.

Warranty conditions

The warranty excludes any defects caused by improper use, damage or by attempts by unauthorised
persons to make a repair. This also applies to normal wear on individual components.
08186_DE-GB-FR-NL_V1.indb 19
Downloaded from www.Manualslib.com manuals search engine
19
07.12.12 09:09