T+A DVD 820 M Betriebsanleitung Seite 59

Camera angle
3/7
currently selected angle (e.g. 3).
CD
A Compact Disc (CD) is a digital data medium which
requires a little care in handling:
• The surface of a CD may only be
cleaned using a soft, dry cloth. Wipe in
straight lines from the centre towards
the edge.
Never use petrol, paint thinners, disc cleaning fluids
•
or similar agents.
CDs must be handled with care to avoid major
•
damage to the surface. Severely scratched surfaces,
writing on the discs, or sticking labels on the discs
may result in a CD which can no longer be read.
• CDs should not be heated or bent. Choose a storage
site which fulfils these requirements.
CD SINGLES
CD singles
correspondingly shorter playing time. The DVD 820 M is
capable of playing CD singles. To load a CD single place
the disc in the circular depression in the centre of the
drawer.
DSP (Digital Signal Processor)
The DVD 820 M features a freely programmable signal
processor. A DSP can process digital signals in any way,
and that is why they allow better oversampling rates than
standard modules.
Downloaded from www.Manualslib.com
Many DVDs and VCDs contain scenes which
were recorded using different camera view
angles. When such a disc is played back, the
screen displays a symbol which indicates the
number of available angles (e.g. 7) and the
are discs of smaller
manuals search engine
DVD
The variable bit rate compression of the DVD, with a read
speed of up to 9.8 Mbit per second, is capable of
recording even the most complex images in their original
quality. The crystal-clear digital pictures have a horizontal
resolution of 720 pixels (points) over more than 500 lines.
This resolution is twice as high as that of the VHS
system, is better than that of LaserDisc, and is directly
comparable to the resolution of digital master recordings
made in recording studios.
DVDs are produced to meet either the PAL or NTSC
video norm. This multi-norm playback device is suitable
for reproducing both types, and plays them in the best
possible quality on your multi-norm TV set. Speech
barriers are a thing of the past, thanks to sound tracks in
up to eight languages, and sub-titles - if present on the
disc - in up to 32 languages. And whether you watch
DVDs on a wide-screen or conventional television, the
quality will always be the same as when you originally
viewed the film at the cinema.
FTS
The FTS title select program gives the user the
diameter and
opportunity to change the sequence of playback of the
tracks on an audio CD. The selection is made and played
using the „OSD" menu.
Menu function
A DVD may contain a Disc Menu with selection facilities
for individual titles and / or chapters. Depending on the
DVD, the disc may also contain alternatives for camera
angle, synchronous languages, sub-titles etc. The menu
function of the DVD player enables you to select these
options from the Disc Menu.
SHUFFLE
In Shuffle mode the tracks of a CD or the titles of an FTS
program can be played back in a randomly selected
order.
TOC
Internal index (TABLE OF CONTENT) of a CD.
If the TOC area of a CD is unreadable due to damage,
scratches etc., the entire CD is rendered unusable.
TRACK
Track is another termed used for a title on a CD. The
tracks and their duration are stated on the CD sleeve.
59
DVD video exploits the latest state of
MPEG 2 data compression technol-
ogy, which makes it possible to store
an entire cinema film on a single
12 cm CD.