Basic Disc Player Settings (Setup Menu); Setup Menu - T+A Dvd 820 M Betriebsanleitung

Basic disc player settings

(SETUP Menu)

The disc player in the DVD 820 M must be set up to
match the characteristics of your TV set and your
preferred methods of use. The settings required for this
are grouped together in a 'Setup Menu', which is
displayed on your television screen. In most cases you
will only need to adjust the settings contained in the
Setup Menu once, i.e. when the machine is initially set up
and installed. You may need to refer to the operating
instructions supplied with your TV set in order to
establish the correct setup values, so please have the
manual to hand before you start this process.
The Setup Menu is divided into the following sub-menus:
• GENERAL SETUP MENU
This is where you set general device settings such as
screen size, display brightness etc.
• AUDIO SETUP MENU
In this sub-menu you set the audio characteristics, such
as the sound mode and format of the digital output.
• VIDEO SETUP
At this point you can set the picture settings of the
DVD 820 M such as the screen format (normal 4:3 /
wide-screen 16:9), video norm and colour / contrast.
• PREFERENCES MENU (stopped disc only)
Here you can set your favoured personal settings, such
as the preferred language for sound reproduction and
sub-menus, child-protection measures etc.
Note:
The "Preferred Settings" sub-menu can only be called up
while the disc is stopped.
An overview of the Player Setup Menu is shown in the
menu summary on the next page. The adjustment
facilities of the individual menus are explained in detail in
the following sections.
Downloaded from www.Manualslib.com manuals search engine
Operating the SETUP menu
Ensure that the disc player is selected as the listening
source, that your TV set is switched on, and that it is
switched to the DVD 820 M's picture input (AV input).
The Setup Menu is opened with a long press on the blue
 button on the remote control handset; please 
 
hold this button pressed in until the Player Setup Menu
appears on your screen. The integral screen on the
DVD 820 M shows 'SETUP SETUP' while the menu is open.
SETUP SETUP
You can now navigate within this menu using the cursor
buttons, and enter the appropriate settings. When you
have made a particular selection, press the 
button to confirm your choice; the setting is then
accepted and stored.
When you open the menu you will initially be at the top
line of the screen menu. At this point you can select the
sub-menu you wish to use (GENERAL / AUDIO / VIDEO /
PREFERRED SETTINGS) using the 
Press the   button to open the appropriate sub-menu.
 
You can now find your way to a particular menu point
using the    /      buttons.
If you wish to change the setting of any particular menu
point, press the   button and select the desired setting
 
using the   /   buttons. Press the 
   
confirm your selection, and the setting is then accepted.
In each case pressing the 
the next higher menu level.
Closing the SETUP menu
To leave the SETUP menu press the 
repeatedly if required - until you return to the topmost line
of the menu. Now select the 'End SETUP menu' option,
and confirm by pressing the 
50
  
 /      buttons. 
 button to
 
 button takes you back to  
 button -  
 button.
 