Appliance Safety; Electrical Safety; Assembly; Unpacking The Machine - AL-KO Robolinho 300 E Betriebsanleitung

Assembly

■
Sitting on the appliance and
reaching into the cutting blade
is forbidden.
■
Keep body and clothes away
from the cutting unit.

3.4.4 Appliance safety

■
Before working, make sure
that there are no objects (e.g.
branches, glass or metal piec-
es, and items of clothing,
stones, garden furniture, gar-
den utensils or toys) in the
work area of the appliance.
They can damage the cutting
blade of the appliance or can
be damaged by the appliance.
■
Only use the appliance under
the following conditions:
■
The appliance is not soiled.
■
The appliance shows no
damage or wear.
■
All controls function proper-
ly.
■
The base station and pow-
er supply as well as their
electrical supply cables are
undamaged and function
properly.
■
Always replace defective
parts with original spare parts
from the manufacturer.
■
Have the appliance repaired if
it has been damaged.
■
The user of the appliance is
responsible for accidents of
495439_a
the appliance involving other
persons or their property.

3.4.5 Electrical safety

■
Never operate the appliance
when a lawn sprinkler is oper-
ating on the mowing area at
the same time.
■
Do not spray the appliance
with water.
■
Do not open the appliance.
4 ASSEMBLY
4.1

Unpacking the machine

1. Open the packaging carefully.
2. Carefully remove all components from the
packaging and check for transport damage.
Note: Notify your AL-KO dealer or service
partner immediately if any transport damage
is discovered.
3. Check the scope of supply, see chapter 2.1
"Scope of supply (01)", page 38.
If the appliance is going to be sent on, retain the
original packaging and accompanying docu-
ments. They will also be required for return ship-
ment.
4.2

Planning the mowing areas (05)

Location of the base station (05/1)
■
Shortest possible distance to the largest
mowing area
■
Level surface
■
Protected against direct sunlight and harsh
weather conditions
■
Connection option for power source
■
Free accessibility to the robot lawn mower
Routing the boundary cable (05)
The boundary cable must be laid in a continuous
loop in a clockwise direction.
Corridors between mowing areas (05/h)
A corridor is a narrow section in the grass surface
and can be used to connect two mowing areas.
Main area and secondary area(s) (05)
■
Main area (05/HF): This is the grass surface
on which the base station is located and
45