Base Station (04); Rechargeable Battery; Functional Description - AL-KO Robolinho 300 E Betriebsanleitung

Product description
2.7 Base station (04)
No. Component
1 Base plate
2 LED for status display
3 Charging contact
4
Home button (
5 Charging station
6 Cable shaft
7 Wheel recess
8 Hole for screw nails (9)
9 Screw nails
* model-dependent (see technical data)
2.8

Rechargeable battery

The rechargeable battery can be changed by the
user.
NOTE Fully charge the rechargeable bat-
tery before using it for the first time. The re-
chargeable battery can be charged in any charge
status. Interrupting charging does not damage
the rechargeable battery. The rechargeable bat-
tery can only be charged after the appliance has
been switched on.
■
The rechargeable battery is partially charged
on delivery. The rechargeable battery is regu-
larly recharged during normal operation. The
appliance returns to its base station for this.
■
The integrated electronic control unit with a
monitoring function terminates the charging
procedure when a 100% charge status is
reached.
■
The charging process only functions with per-
fect contact of the charging contacts on the
base station with the contact surfaces of the
appliance.
■
The built-in protection circuit prevents the re-
chargeable battery from being charged at
temperatures above 45 °C. This prevents ir-
reparable damage to the rechargeable bat-
tery.
■
If the operating time of the rechargeable bat-
tery becomes shorter despite being fully
charged, replace the battery.
■
If the battery charge level has dropped below
the threshold set by the manufacturer as a
result of ageing or excessively long storage,
495439_a
) *
this means it can no longer be recharged.
Have the battery and the monitoring electron-
ic control unit checked by an AL-KO dealer,
technician or service partner, and replace
them if necessary.
■
The rechargeable battery status is shown on
the display. Check the rechargeable battery
status after about 3 months in storage. To do
so, switch on the appliance and read off the
rechargeable battery status. If the recharge-
able battery is now only charged to approx.
30 % or less, place the appliance in the base
station and switch it on so the rechargeable
battery is charged. If the charging station was
removed to store the base station (see chap-
ter 11.2 "Storing the charging pole (12)",
page 55), first mount it again in reverse or-
der and connect the base station to the
mains supply again.
■
If electrolyte has escaped into the battery
compartment: Have the appliance repaired
by an AL-KO service centre.
■
If the rechargeable battery has been re-
moved from the appliance: If the eyes or
hands have come into contact with escaped
electrolyte, flush them immediately with wa-
ter. Immediately consult a doctor.
2.9

Functional description

Moving on the grass surface
The appliance moves freely in a mowing area de-
limited by a boundary cable. The appliance is ori-
ented by means of the sensors that detect the
electromagnetic field of the boundary cable.
If the appliance encounters an obstacle, it stops
and then continues in another direction. If the ap-
pliance gets into a situation where it cannot oper-
ate, this is indicated by a message on the dis-
play.
Robolinho 450 W/700/1200/200: If the appliance
detects moisture when the rain sensor is
switched on, it automatically returns to the base
station.
Mowing and charging
The mowing phases alternate constantly with the
charging phases. If the charge of the recharge-
able battery drops to a specific value (display:
0 %) during mowing, the appliance returns to the
base station along the boundary cable.
Mowing programs are preset and can be custom-
ised on the appliance or in the app.
41